Filter
Top Products
8
2. Installing the system between the driver/passenger seat
(Refer to Figure 4)
Figure 4
1)Take one of the supplied straps from the lower compartment
of the bag, and connect the latch to the upper side metal ring on
the left side of the bag. Attach the "S" hook to the same ring
after looping the strap around the headrest of the driver's seat.
Repeat this process for the right side (Passenger Seat).
2)Take another strap and connect the latch to lower metal ring on
the left side of the bag. Attach the "S" hook to the same ring
after looping the strap around the driver's seat rail. Repeat this
pro-cess for the right side. In some vehicles, it may be neces-
sary to attach the "S" connector to the rail directly, as it may not
be long enough to reach back to the ring.
3) Adjust the straps tightly so that the bag is secured.