Filter
Top Products
©American Audio® - www.americanaudio.us - SDJ2™ Instruction Manual Page 25
SEARCH LOCK:
Enter PRESET MENU, and then turn the
FOLDER KNOB (8) until SEARCH LOCK is
displayed. Press the FOLDER KNOB (8) to
toggle between ON or OFF. Once you have
selected turn the FOLDER KNOB (8) so that
PRESET is displayed and press the knob to
exit. The default setting is OFF.
When the SEARCH LOCK is ON a fast search can only be done when the player is in PAUSE mode,
not PLAY mode.
PRESET MENU (CONT.)
Figure 34
Q CURVE:
Enter PRESET MENU, and then turn the
FOLDER KNOB (8) until Q CURVE is dis-
played. Press the FOLDER KNOB (8) to toggle
Q CURVE between QUICK or NORMAL. Once
you have selected turn the FOLDER KNOB (8)
so that PRESET is displayed and press the
knob to exit. The default setting is NORMAL.
Figure 36
Figure 33
XFADER:
Enter PRESET MENU, and then turn the
FOLDER KNOB (8) until XFADER is dis-
played. Press the FOLDER KNOB (8) to toggle
XFADER between ON or OFF. Once you have
selected turn the FOLDER KNOB (8) so that
PRESET is displayed and press the knob to
exit. The default setting is ON.
The XFADER function is only available when the MIXER OUTPUT is active. This fader function is
used to mix the output signals from both the left and right players. When the XFADER is "ON" the
signals from the left and right players will mix according to the CROSSFADER (21) position. When the
XFADER is "OFF" the output of both players will be even.
Figure 35
X FADER REVERSE:
Enter PRESET MENU, and then turn the
FOLDER KNOB (8) until X FADER REVERSE
is displayed. Press the FOLDER KNOB (8) to
toggle X FADER REVERSE either ON or OFF.
Once you have selected turn the FOLDER
KNOB (8) so that PRESET is displayed and
press the knob to exit. The default setting is
OFF.