Filter
Top Products
©American Audio® - www.americanaudio.us - SDJ2™ Instruction Manual Page 18
BASIC OPERATIONS (CONT.)
8. SETTING a CUE POINT:
Setting A Cue Point:
A cue point is the exact point playback will begin when the PLAY/PAUSE Button (18) is pressed. You may set
your cue point anywhere on a track. There are two ways to set and create a CUE point as detailed in figures
11 and 12.
1) You may press the IN BUTTON (25) on the fly
(while the track is playing). This will set a CUE
Point without music interruption. Pressing the
CUE BUTTON (19) will now return you to the
same point that you pressed the CUE BUT-
TON (19).
Figure 11
2) You may also use the JOG WHEEL (16) to set
a cue point. While a track is in PAUSE or
CUE mode, press the SEARCH BUTTON (17)
and use the JOG WHEEL (16) to scroll
through a track to find your desired starting
point. Once you have found your desired po-
sition press the PLAY/PAUSE BUTTON (18)
to set your cue point. Pressing the CUE
BUTTON (19) will now return you to this ex-
act point.
Figure 12
Press PLAY/PAUSE BUTTON (18) to activate
playback mode.
9. CREATING AND PLAYING A SEAMLESS LOOP
A seamless loop is a sound loop that plays continuously without sound interruption. You can use this
loop to create dramatic effect in your mixing. This loop has no time limit and you could actually loop
the entire length of a card. You create a seamless loop between two continuous points of a track.
Figure 13
1)