Filter
Top Products
BASIC OPERATIONS (CONT.)
©American Audio® - www.americanaudio.us - SDJ-1™ Instruction Manual Page 18
10. EXITING A LOOP - To exit a SEAMLESS
LOOP, press the OUT BUTTON (12). The IN
BUTTON and OUT BUTTON (12) LEDs will
remain on, but will stop flashing. Music
playback will resume normal play. The but-
ton LEDs will remain on to remind you that
a loop is stored in memory.
Figure 15
11. REPLAY LOOP - The RELOOP (12) func-
tion allows you to return to your stored loop
at any time. The IN BUTTON (12) and OUT
BUTTON (12) LEDs will indicate a loop is stored
in memory, and may be played at any time. To
replay the loop, press the RELOOP BUTTON
(12). The IN BUTTON (12) and OUT BUTTON
(12) LEDs will again begin to flash indicating
SEAMLESS LOOP mode has been activated
and your stored loop will immediately begin to
play.
Stutter Effect: You can use your loop to create
a stutter effect. When a loop is playing press
the IN BUTTON (12) repeatedly to create this
effect.
Figure 16
Figure 17
TIME BAR INDICATOR - Details the time defined in the TIME METER (28) as a visual bar icon. As with the
TIME METER (28) this bar is also dependent on the selected time function ELAPSED, or REMAIN. This bar will
begin to flash when a track is ending regardless of which time function you are in. Use the flashing bar as a
visual reminder that a track is ending.
12. CHANGING THE TIME DISPLAY (28)\TIME BAR (29):
DURING NORMAL PLAYBACK, pressing the TIME BUTTON (8), will change the time display information (28 &
29) in the LCD (3). The following is a break down of the time settings and their definitions:
1) ELAPSED - This describes the time in the LCD as the current TRACKS Elapsed running time.
2) REMAIN - This describes the time in the LCD as the current TRACKS remaining running time.