Filter
Top Products
SINGLE
TOTAL
REMAIN
TRACK M S F
©American Audio® - www.AmericanAudio.us - MCD-510™ Instruction Manual Page 13
LIQUID CRYSTAL DISPLAY (LCD)
LCD DISPLAY (FIGURE 7)
34. TIME BAR INDICATOR - This bar visually details the time defined in the TIME METER (39, 40, &
41
). As with the TIME METER (39, 40, & 41), this bar is also dependent on the selected time function
REMAIN (38
), TOTAL REMAIN (37), OR ELAPSED. This bar will begin to flash when 15 seconds of a
track remain and will begin to rapidly flash when three seconds of a track remain. The flashing bar is
a great visual reminder a track is about to end. The flashing bar will function regardless of which time
mode the unit is in.
35. SINGLE INDICATOR - This indicates the unit is in single play mode
. In single play mode, the unit
will play a single and return to CUE mode.
36. PITCH METER -
This meter displays the pitch percentage being applied to playback by the
PITCH SLIDER (
3). If the meter read zero regardless of the PITCH SLIDER'S (3) position, the PITCH
(5) function is not activated.
37. TOTAL REMAIN INDICATOR - This indicator is in direct reference
to the TIME METER (39, 40, &
41
). When the TOTAL REMAIN indicator is displayed in the LCD (2), the time defined will refer to the
entire discs' remaining time. The time mode is changed by tapping on TIME BUTTON (
8). The unit
will indicate the ELAPSED time when neither the TOTAL REMAIN OR REMAIN indicators are
showing. Note: When playing a Mp3 disc the TOTAL REMAIN time of a disc cannot be shown.
Only the REMAIN time and ELAPSED time of the track.
38
. REMAIN INDICATOR - This indicator is in direct reference to the TIME METER (39, 40, & 41).
When the REMAIN indicator is displayed in the LCD (2), the time defined will refer to a single track's
remaining time. The time mode is changed by tapping on TIME BUTTON (
8). The unit will indicate
the ELAPSED time when neither the TOTAL REMAIN OR REMAIN indicators are showing.
39. FRAME METER -
This meter will display the elapse, total, or frames. The displayed frames will
be indirect reference
to the current time mode.
40. SECONDS METER -
This meter will display the elapse, total, or remaining time in seconds. The
display time will be indirect reference to the current time mode.
41. MINUTES METER - This meter will display the elapse, total, or remaining time in minutes. The
display time will be indirect referenc
e to the current time mode.
42
. TRACK INDICATOR - This double digit indicator details a current track. The number displayed in
the track indicator is a direct reference
to a track being selected for programming or a track in play,
pause, or cue mode.
Figure 7
34
42 41 40 39 38 37
3635