Alpine KH 2279 Portable CD Player User Manual


 

|
Operating Instructions
2 Open the battery compartment inside the CD compartment and insert the two re-
chargeable batteries. Ensure that the batteries are inserted into the battery compartment
according to their polarity – as indicated inside the battery compartment.
3 Close the battery compartment cover. It must be audibly locked in place. Close the CD
compartment by pressing down the cover until it is audibly locked in place.
4 Insert the plug on the mains adapter cable into the “DC 4.5 V” socket.
5 Plug the mains adapter into a mains socket.
6 To start charging the batteries set “ON” with the “CHARGE” slide on the underside of the
MP3-CD player. The “CHARGE” indicator will now light up in red.
Warning!
Only use the supplied mains adapter to charge the rechargeable batteries in the MP3-CD
player!
Battery charging continues …
during CD playback or
after the MP3-CD player has been switched off.
7 After 15 hours charging set “OFF” with the “CHARGE” slide and disconnect the mains
adapter from the mains socket.
ô
Info:
Rechargeable batteries should always be fully discharged before they are recharged, other-
wise they can suffer a serious decline of their storage capacity (Memory Effect)!
If the performance of the MP3-CD player decreases significantly although the rechargeable
batteries have been charged properly, please exchange all batteries with new ones. Alter-
natively you may operate the MP3-CD player via the mains supply.
Following first-time charging, or if the MP3-CD player has not been used for an extended
period, the playback time may be shorter. In this case the batteries should be fully dis-
charged and fully recharged several times.
8. Conventional audio CDs
8.1. Playback
1 Open the CD compartment by pushing to the right the “OPEN” slide on the front of the
player.