Filter
Top Products
8 9
1 .3 PREPARE YOUR PHONE OR DEVICE
Turn on Bluetooth®.
ON AN IPHONE®, IPOD®, OR IPAD®
Go to SETTINGS > GENERAL > and
enable
BLUETOOTH
ON A BLACKBERRY®
Go to SETTINGS/OPTIONS >
BLUETOOTH
and enable BLUETOOTH
OTHER CELL PHONES
Go to JAWBONE.COM/PAIRING or review
the instruction manual that came with
your phone.
1 .4 MAKE THE CONNECTION
Go to your device’s Bluetooth® settings.
ADD OR SEARCH FOR DEVICES
When “JAMBOX by Jawbone” appears,
select it.
IF ASKED FOR A PASSCODE
Enter “0000”
This is a one-time event per device. To pair
your Jawbone JAMBOX to another device,
repeat steps 1.2 to 1.4.
1 .5 OR PLUG & PLAY
No Bluetooth? JAMBOX also connects via
3.5mm stereo input.
Play audio from any device with a headphone
jack or audio output.
3.5mm STEREO
1 .2 PREPARE YOUR JAMBOX fOR PAIRING
1
Hold the ON/OFF SWITCH in the upmost
position for about 3 seconds.
2 Wait for the LED RING to flash red & white.
3 You will hear JAMBOX say that it is ready
to pair.
4 Release the ON/OFF SWITCH to the
middle/on position.
4
1 2