Aiwa CSD-ES370 Clock Radio User Manual


 
SPECIFICATIONS
Tuner section
Frequency range
FM: 87.5–108.o
MHz
Antenna: Rod antenna
AM: 530–1 ,710 kHz
Antenna: Ferrite bar antenna
Deck section
Track format
4 tracks, 2 channels
Frequency range Normal tape: 50-12,500 Hz (EIAJ)
Recording system AC bias
Erasing system
Magnet erase
Heads Recording/playback head (1)
Erasure head (1)
CD player section
Disc
Compact disc
Scanning method
Non-contact optical scanner (semiconductor
laser)
Laser
Semiconductor laser ?L=780 nm
Rotation speed
Approx. 500–200 rpm/CLV
Error correction Cross interleave, Reed Solomon code
No. of channels 2 channels
DIA conversion
1-bit DAC
TROUBLESHOOTINGGUIDE
Common section
Speaker
100
mm cone type (2)
36 mm cone type (2)
output
Headphones jack (stereo Imini-jack)
Power output 4 W + 4 W (EIAJ 4 ohms DC)
Power requirements DC 12 V usina eiaht R14 (size C) batteries
Power consumption
Dimensions
Weight
<CSD-ES770>
<CSD-ES5701ES370>
Accessories
LH model: A~ 11~–120 V’/ 220–240 V
selectable, 50/60 Hz
UI model: AC 120 V, 60 }+.z
LH model: 27 W
U1 model: 22 W
430 (W) x 154 (H) x 248 (D) mm
(17 x 61/8x 97/8 in.)
Approx. 3.7 kg (8.14 Ibs.) (excluding batteries)
Approx. 3.5 kg (7.7 Ibs.) (excluding batteries)
AC cord (1)
Remote control (1) (CSD-lES770/ES570 only)
Specifications and external appearance are subject to change witho&
notice.
Specifications, trade mark, model name and doublle square symbol
are marked on the bottom of the unit.
There is no sound.
An incorrect function was selected. Set the FUNCTION switch to select the correct input.
There is constant, wave-like static,
The radio station is not correctly tuned.
Correct the tuning,
There is noise.
The unit is picking up outside noise. Change the location or direction of the antenna.
Turn the unit to a different orientation.
Move the unit away from other electrical appliances,
like a TV or fluorescent lights, or move the appli-
ances.
Tape does not run.
I QThe II PAUSE button was pressed.
I
Press the ii PAUSE button again.
I
Recording is impossible.
The erasure prevention tab of the cassette
Cover the tab opening with cellophane tape.
has been broken off.
The recording head is dirty.
Clean the head.
The
REC button cannnot be
c The D light of the OPE/BATT/DIR indica-
. Press the DIR button until the U light of the OPE/
depressed. (CSD-ES770 only)
tor lights.
BATT/DIR indicator lights.
Erasure is not done completely. I
The erasure head is dirty.
I
Clean the head.
I
A metal or chrome tape is being used.
n
Sound that has been already recorded on type IV
(metal) or type II (high/CrOz) t~~pes may not be
erased completely by this unit.
CD does not play.
The disc is incorrectly placed.
‘+
o Place the disc with the label facing up,
The disc is dirty. Clean the disc.
There is condensation on the lens.
Wait one or two hours and try again.
The ~laver is on ~ause.
Press the -11 PLAY/PAUSE button to release ~ause.
To reset
If an erroneous display or malfunction occurs, disconnect the AC cord
and remove all the batteries to turn off the display. And turn the power
back on.
28