A SERVICE OF

logo

16
RW Series User Guide
Charging Battery Packs with the LI72 Three-Wire Version (AT18737-x)
Plug the LI72 into the appropriate AC wall receptacle, then
insert the charge cable into the battery pack charger jack.
The amber/green charge indicator LED will indicate the sta-
tus of the charger as per the following table.
LED
Status
Charger Status
Green Solid
Fully Charged
Amber Solid
Charging
Amber
Blinking
Battery Contact Problem
1. Short Circuit of Output Terminals
2. Detection of Short Battery’s Circuit
3. No Contact + Terminal
Over Voltage Protection
Over Current Protection
Temperature Waiting Time
Operating Temperature
0 to 40
o
C @ 30 to 85% Relative Humidity
Storage Temperature
-30 to 60
o
C @ 10 to 90% Relative Humidity
Input Voltage
AC100-240V 47-63Hz
Input Current
0.18A MAX
Output
DC 8.4V 800mA