2. The printhead is open.
•
Close the top cover and media access door. Then, press the Feed button
to resume printing.
The media is out.
•
Loadarollofmedia,followingtheinstructionsin“LoadingtheMedia”
in Getting Ready to Print. Then, press the Feed button to resume
priting.
The ribbon is out (PT400 only).
•
Loadtheribbon,followingtheinstructionsin“LoadingtheRibbon”in
Getting Ready to Print. Then, press the Feed button to resume printing.
The head open sensor plate is dirty.
•
Clean the head open sensor plate according to the instructions in
PreventiveMaintenance.
3. The printer is paused.
•
Press the Feed button to resume printing.
4. The printhead is under temperature.
• Continue printing while the printhead reaches the correct operating
temperature.
5. The printhead is over temperature.
•
Printing automatically stops until the printhead cools to an acceptable
printing temperature; then, the printer automatically resumes operation.
The battery is over temperature.
•
Printing automatically stops until the printer and battery cool to an
acceptable operating temperature; then, the printer automatically
resumes operation.
6. The battery is under voltage (level 1).
•
Wait until the current label finishes printing, then plug the battery
charger into the printer (you don’t have to turn off the printer to do this).
34
