iii
FOREWORD
This manual contains installation and operation information for the Eltron P520 Series
card printers manufactured by Zebra Technologies Corporation.
RETURN MATERIALS AUTHORIZATION
Before returning any equipment to Zebra Technologies Corporation for in-warranty or
out-of-warranty repair, contact Repair Administration for a Return Materials
Authorization (RMA) number. Repack the equipment in the original packing material
and mark the RMA number clearly on the outside. Ship the equipment, freight prepaid,
to the address listed below:
For USA and Latin America:
Zebra Technologies Corporation
Eltron Card Printer Products
1001 Flynn Road
Camarillo, CA. 93021-8706.USA
Phone: +1 (805) 579-1800
FAX: +1 (805) 579-1808
For Europe, Asia and Pacific:
Zebra Technologies Inc. France
Eltron Card Printer Products
Zone Industrielle, Rue d’Amsterdam
44370 Varades, France
Phone: + 33 (0) 240 097 070
FAX: + 33 (0) 240 834 745
COPYRIGHT NOTICE
This document contains information proprietary to Zebra Technologies Corporation.
This document and the information contained within are Copyrighted by Zebra
Technologies Corporation and may not be duplicated in full or in part by any person
without written approval from Zebra. While every effort has been made to keep the
information contained within current and accurate as of the date of publication, no
guarantee is given that the document is error-free or that it is accurate with regard to
any specification. Zebra reserves the right to make changes, for the purpose of
product improvement, at any time.
TRADEMARKS
P520 is a service mark and Eltron is a registered trademark of Zebra Technologies
Corporation. Windows and MS.DOS are registered trademarks of Microsoft Corp. All
other trademarks or registered trademarks are marks of their respective holders.
iii
