ZXP Series Toolbox
Information
P1013372-001 Rev. A Zebra ZXP Series 8 Card Printer with Laminator 85
Information
Printer
This information cannot be edited or changed by the user; however, this information may be
useful for Zebra trained and certified personnel in diagnosing or evaluating printer status.
• Firmware and Driver lists the versions of the Firmware (Firmware version, HCB, MAB,
Laminator, and Laminator MAB) and the version of the Driver.
• Other shows the Interface, the Transfer type, and the Card type in use, RAM, Printer
serial no, and Laminator serial no.
• Options shows the options installed -- Magnetic encoding, Contact smartcard, Contactless
smartcard, and Laminator type.
• Status displays Warnings, Faults, and Status; Input and Output speeds (single and
double); Top and Bottom transfer temperatures.
• Network Configuration lists the IP address, Gateway, Subnet mask, and MAC address.
• OCP shows the Language displayed in the Operator Control Panel and the LCD contrast
level selected.
• Odometer shows the number of Cards printed and the number of Printhead lines printed.
