25
English
1 Follow steps 1 – 5 shown in “BASIC OPERATIONS” on
page 18.
2 Select the desired program that is suitable for the
source.
On the remote control On the front panel:
transmiter:
a)
Turn on the DSP so that a
program name lights up on
the display.
b)
Select a desired program
confirming it on the display.
The selected program name is shown on the display.
3 If desired, adjust the delay time and the output level of
each speaker. (For details, refer to the corresponding
descriptions on page 26.)
Notes
●
Program selection can be made to individual input sources.
Once you select a program, it is linked with the input source
selected at that time. So, when you select the input source
the next time, the same program will be automatically called.
●
If you prefer to cancel the DSP, press the EFFECT button.
The sound will be the normal 2-channel stereo without
surround sound effect.
●
When HALL or ROCK is selected, no sound is heard from
the center speaker.
●
When a monaural sound source is played with PRO
LOGIC, no sound is heard from the rear speakers.
●
When PRO LOGIC is selected, if the main-source
sound is considerably altered by overadjustment of the
BASS or TREBLE control, the relationship between the
center and rear channels may produce an unnatural effect.
Playing a source with an effect of the digital sound field processor (DSP)
SUR.
SUR.
