First-Time Setup
3
11
Chapter 3: Completing the First-Time Setup
The rst time you turn on the TV, the Setup App will guide you through each of the steps
necessary to get your TV ready for use.
Before you begin the rst-time setup:
• Your TV should be installed. See
Chapter 1: Installing the TV on page 1
.
• Your devices should be connected. See
Chapter 2: Controls and Connections on page
4
.
• If you have a wireless network, have the network key ready.
• If you are connecting to your network with an ethernet cable,
connect it to the ethernet port on the TV.
To complete the rst-time setup:
1. Press the Power/Standby button on the remote. The
TV powers on and the Setup App starts.
2. Activate the remote by pressing Record and the
Green VIA Shortcut button for 5 seconds, then
highlight Begin Activation and press OK.
Wait for the remote to be found.
3. When the remote is found, use the Arrow Up/Down
buttons on the remote to highlight Connect to the
Internet and press OK.
