Adjusting the refrigerator shelves...
1 First, remove food from shelf
2. Slide shelf straight out to stop
3 Lift front
4.
Slrde the rest of the way out
Replacing Shelf:
1 Frt back of shelf on top of guides with wire stops
on the bottom of guides
2 Lift front, slide shelf in untrl it clears guide stops
Removing the crisper, trivet and
crisper cover...
Removing crisper:
I. Slide crisper straight out to stop
2 Loft the front.
3 Slrde the rest of the way out.
4 Replace in reverse order
Removing trivet:
I, Lift the trivet from the support brackets on the back
wall.
2 Replace in reverse order
Removing cover:
1. Lift front, then lift back.
2. Pull up and out.
Replacing cover:
1 Fit notches on back of cover into supports on back
wall of refrigerator.
2. Lower front into place
Changing the light bulb.. .
WARNING: Before removing the light bulb, either
unplug the refrigerator or disconnect
the electricity leading to the re-
frigerator at the main power supply.
Shock and injury can occur if elec-
tricity remains connected.
1 Reach behind control console to find bulb
2 Remove bulb
3. Replace with a 40-watt appliance bulb
Ice cube trays...
, ,
1, \
To remove ice:
1. Hold tray at both ends.
2. Slrghtly twist.
‘f-q-
Shelf Guide
I ‘I
Lift the Front, Then the Back.
Pull out to stop.
Lift the Front and Pull Again.
If cubes are not used, they may shrink. The moving
cold oir starts a slow evaporation. The longer cubes
are stored, the smaller they get.
