Do not lay the spray gun.
•
The device is equipped with a thermal release which disconnects the device in case of
•
overheating. In this case, turn o the device, remove the plug and let the device cool
down for at least 1/2 hour. Eliminate the cause of heating, e.g. soiled air lter, slots for
air intake covered.
With original WAGNER accessories and spare parts, you have the guarantee that
all safety regulations are fullled.
4. Description/ Scope of delivery
Description/ Scope of delivery (Fig. 1)
Air cap1) Nozzle2)
Spray jet adjustment ring3) Union nut4)
WallPerfect 5) I-Spray spray attachment Trigger6)
Air volume control7) Spray gun rear part8)
Air lter cover (right + left)9) Material volume adjustment10)
Mains lead11) Container12)
Valve13) Ventilating hose14)
Stirring rod15) Feed hopper (2 pcs.)16)
Practice poster17) Replacement air lter (2 pcs.)18)
PerfectSpray 800 spray attachment19) Replacement nozzle seal*20)
Lubricating grease*21)
* This is inside the container: remove it before starting operations!
5. Field of application
Many dierent coating substances can be processed with the Flexio 580.
A dierent spray attachment must be used, depending on the coating substance:
Coating Materials Spray attachment
Low-viscosity coating substances:
Water- and solvent-based paints, nishes,
primers, 2-component paints, clear
nishes, automotive nishes, staining
sealers and wood sealer-preservatives.
All coating materials with the red Perfect
Spray logo
Perfect Spray (anthracite)
