Vulcan Materials MG60 ML-52524 Manual

A SERVICE OF

next previous

– 16 –

GRIDDLE THERMOSTAT CHECKS AND CALIBRATION

Refer to GRIDDLE THERMOSTAT ADJUSTMENTS in this manual for the procedures for checking and

calibrating the thermostat for the griddle.

GRIDDLE THERMOSTAT REPLACEMENT

Tools Required: Pipe wrench, 6" adjustable wrench,

1

⁄8" flat blade screwdriver,

5

⁄16" socket, and

socket wrench.

1. Disconnect range gas supply and allow range to cool.

2.

Tilt the front of the griddle up and carefully slide the capillary bulb from the Y-shaped mounting guides

on the underside of the griddle assembly (Fig. 15).

Fig. 15

3.

Remove griddle assembly.

4.

Remove burner valve knobs (Fig. 16).

5. Remove (4) screws holding the control panel in place.

6. Remove burner and pilot tubing (Fig. 17).