5
Optiquest Z90
Getting Started
E
N
G
L
I
S
H
Getting Started
Congratulations on your purchase of a Optiquest Z90 color monitor.
Important! Save the original box and all packing material for future
shipping needs.
NOTE: This product was designed for operation in the magnetic fields of the
hemisphere where it was purchased. Also, the word "Windows
®
" in this user
guide refers to the following Microsoft
®
operating systems: Windows '95,
Windows '98, Windows NT
®
(4.0).
Package Contents
Your Optiquest Z90 package includes:
Getting Started
• Z90 monitor
• Power cord
• Attached video cable, with a
15 pin connector
• For best viewing conditions sit at
least 18" from the monitor.
• AVOID TOUCHING THE SCREEN
WITH YOUR FINGERS. Oils from
the skin are difficult to remove.
•
NEVER REMOVE THE REAR
COVER. The monitor contains high-
voltage parts. You may suffer serious
injury if you touch these parts.
• Avoid exposing the monitor to direct
sunlight or another heat source. The
monitor should be facing away from
direct sunlight to reduce glare.
• Always handle your monitor with
care when moving it.
Precautions
•
Choose a well ventilated area to
position your monitor. Do not place
anything on the monitor that prevents
adequate dissipation of heat.
•
Ensure the area around the monitor
is clean and free of moisture.
•
Keep the monitor away from
magnets, motors, transformers,
speakers, and televisions.
•
Do not place heavy objects on the
monitor, video cable, or power cord.
•
If smoke, abnormal noise, or strange
odor is present, immediately switch
the monitor off and call your dealer or
Optiquest. It is dangerous to continue
using the monitor.
IMPORTANT: The supplied INF file assures compatibility with Windows
operating systems, and the ICM (Image Color Matching) file ensures accurate
on-screen colors. Optiquest
®
recommends that you install both files: insert the
diskette, run install.exe and follow the on-screen instructions.
• INF and ICM installation files
on diskette
• User’s guide
