ViewSonic N1700w 29
Troubleshooting
No power
Make sure power button (or switch) is ON.
Make sure A/C pow er cord is securely connected to the DC power supply
and the power supply is firmly connected to the Display.
Plug another electrical device (like a radio) into the power outlet to verify
that the outlet is supplying proper voltage.
Power is ON but no screen image
Make sure the video cable supplied with the Display is tightly secured to
the video output por t on the back of the computer . If the other end of the
video cable is not attac hed perma nentl y to the Disp lay, tightly s ecure it to
the NexTVision display.
Adjust brightness and contrast.
If you are using an Macintosh older than G3, you need a Macintosh
adapter.
Wrong or abnormal colors
If any colors (red, green, or blue) are missing, check the v ideo cable to
make sur e it is securely connected. Loos e or broken pins in the cable
connector could cause an improper connection.
Connect the Display to another computer.
Control buttons do not work
Press only one button at a time.
VXP problems
The VXP adapter must be plugged in when the display is turned on. It is
not “hot-pluggable”.
