Shipping weight
(lbs)
78.3
Shipping weight
(kg)
35.5
Shipping
Dimensions
(HWD/in)
9 x 22 x 32.8
Shipping
Dimensions
(HWD/cm)
22.9 x 55.9 x 83.3
Unit weight (lbs) 68.8
Unit weight (kg) 31.2
Unit Dimensions
(HWD/in)
3.5 x 17.3 x 26
Unit Dimensions
(HWD/cm)
8.9 x 43.9 x 66
Material of
construction
Steel
Form factors
supported
Supports 2U rackmount installation in 4 post racks using included mounting accessories. Add 2POSTRMKITWM for two
post racks and wallmount installation. Add 2-9USTAND accessory for upright tower installation
Cooling method Fans
Battery Access Battery access panel enables hot swappable battery replacement
ENVIRONMENTAL
Relative Humidity 0-95% non condensing
Operating
Temperature
32-104 F / 0-40 C
COMMUNICATIONS
Network
monitoring port
Includes USB port (HID enabled), DB9 Serial port (RS232 and contact closure supported)
Software and
cabling included
Includes PowerAlert software, plus USB and DB9 cabling
SNMP
compatibility
Built-in card accessory slot supports optional SNMPWEBCARD and RELAYIOCARD network accessories
LINE / BATTERY TRANSFER
Transfer time from
line power to
battery mode
Zero transfer time in double-conversion mode. 4 milliseconds typical transfer time in economy mode.
Low voltage
transfer to battery
power
Switches to battery power as line voltage drops to 80V or less (70V at loads under 70%)
High voltage
transfer to battery
power
Switches to battery power as line voltage increases to 144V or higher
SPECIAL FEATURES
EPO port Supports "Emergency Power Off" via set of dedicated built-in EPO jacks
Cold Start Yes, inverter can be "cold started" to enable temporary AC output during a power failure
Appearance Attractive black steel rackmount housing
BATTERY PACK ACCESSORY (optional)
Battery Pack
Accessory
(optional)
BP72V15-2U (limit 1), BP72V28RT3U (multi-pack compatible)
CERTIFICATIONS
Certifications Tested to UL1778 (USA), CSA (Canada), NOM (Mexico), FCC Part 15 Class A (EMI)
