Passphrase: Available in HEX mode only. Type in any phrase up to 31
characters, click Generate, and the unit will generate a set of 4 keys
automatically. The same phrase on compatible 11Mbps wireless devices will
generate the same set of keys. You can also manually enter the 4 keys.
Please note that only one key can be activated at a time.
Click Apply if you have made any changes or additions.
Click Cancel to discard the changes.
IP Settings
Click on this tab to change
device's IP Addresses.
The default IP Address is
192.168.1.1
LAN IP: If you have a DHCP Server,
such as an Internet Router, on the
network, click Obtain IP
Automatically. Or you can
manually enter the IP address,
Subnet Mask, and Gateway by
clicking Fixed IP.
If the Access Point's LAN IP range is different from the configuration
computer's IP range, the computer will not be able to enter the
configuration menu using web browser.
DHCP Server: Available only when LAN IP is Fixed IP. Click On to enable
the TEW-310APB to assign IP addresses to computers on the network.
Click Off to disable this feature.
IP Range: IP address range that the device will distribute (e.g. From
192.168.1.2 To 192.168.1.100). Available when DHCP Server is On.
15
Fig. 5.5
