TL-WR702N 150Mbps Wireless N Nano Router
- 131 -
For ASCII, the key can be made up of any numbers 0 to 9 and any letters A to Z, the length
should be between 8 and 63 characters.
For Hexadecimal, the key can be made up of any numbers 0 to 9 and letters A to F, the
length should be between 8 and 64 characters.
Please also note the key is case sensitive, this means that upper and lower case keys will
affect the outcome. It would also be a good idea to write down the key and all related wireless
security settings.
• Group Key Update Period - Specify the group key update interval in seconds. The value
should be 30 or above. Enter 0 to disable the update.
Be sure to click the Save button to save your settings on this page.
7.7 DHCP
Figure 7-10 The DHCP menu
There are three submenus under the DHCP menu (shown in Figure 7-10): DH
CP Settings,
DHCP Clients List and Address Reservation. Click any of them, and you will be able to
configure the corresponding function.
7.7.1 DHCP Settings
Choose menu “DHCP → DHCP Settings”, and then you can configure the DHCP Server on the
page as shown in Figure 7-11. The Router is set up by default as a DHCP (Dynamic Host
Configur
ation Protocol) server, which provides the TCP/IP configuration for all the PC(s) that are
connected to the Router in the LAN.
