Figure 13-6 SNMP User
The following entries are displayed on this screen:
¾ User Config
User Name: Enter the User Name here.
User Type: Select the type for the User.
z Local User: Indicates that the user is connected to a
local SNMP engine.
z Remote User: Indicates that the user is connected to
a remote SNMP engine.
Group Name: Select the Group Name of the User. The User is classified
to the corresponding Group according to its Group Name,
Security Model and Security Level.
Security Model: Select the Security Model for the User.
Security Level: Select the Security Level for the SNMP v3 User.
Auth Mode: Select the Authentication Mode for the SNMP v3 User.
z None: No authentication method is used.
z MD5: The port authentication is performed via
HMAC-MD5 algorithm.
z SHA: The port authentication is performed via SH
(Secure Hash Algorithm). This authentication mode
has a higher security than MD5 mode.
Auth Password: Enter the password for authentication.
Privacy Mode: Select the Privacy Mode for the SNMP v3 User.
z None: No privacy method is used.
z DES: DES encryption method is used.
Privacy Password: Enter the Privacy Password.
185
