A SERVICE OF

logo

Open as PDF
next previous
Figure 4-5 System Time
The following entries are displayed on this screen:
¾ Time Info
Current System
Date:
Displays the current date and time of the switch.
Current Time Mode: Displays the current time mode of the switch.
¾ Time Config
Manual: When this option is selected, you can set the date and time
manually.
Get GMT: When this option is selected, you can configure the time zone and
the IP Address for the NTP Server. The switch will get GMT
automatically if it has connected to a NTP Server.
z Time Zone: Select your local time.
z Primary/Secondary NTP Server: Enter the IP Address for the
NTP Server.
Synchronize with
PC’S Clock:
When this option is selected, the administrator PC’s clock is
utilized.
¾ DST Config
DST Status: Enable or Disable DST.
Start Time: Select the Start Time of DST.
End Time: Select the End Time of DST.
14