TL-R488T Load Balance Broadband Router User Guide
46
Filtering, MAC Address Filtering and Screen are disabled, and their settings are ineffective in the
default settings.
Figure 4-30
¾ Enable Firewall - Enable the general firewall switch or not.
¾ Enable IP Filtering - Enable the IP Address Filtering or not. There are two default filtering
rules, please select the rule for your need.
¾ Enable Domain Filtering - Enable the Domain Filtering or not.
¾ Enable MAC Filtering - Enable MAC Address Filtering or not. There are two default filtering
rules, please select the rule for your need.
¾ Enable Screen - Enable the screen function or not.
4.6.2 IP Filtering
Choose menu “Security→IP Filtering”, you can configure the IP Address filtering rule in the next
screen (shown in Figure 4-31). The IP Address Filtering feature allo
ws you to control Internet
Access by specific users on your LAN based on their IP addresses.
