A SERVICE OF

logo

Open as PDF
next previous
-73-
Figure 3-47 Static Route
The following items are displayed on this screen:
Static Route
Destination:
Enter the destination host the route leads to.
Subnet Mask:
Enter the Subnet Mask of the destination network.
Next Hop:
Enter the gateway IP address to which the packet should be sent next.
Interface:
Select the physical network interface, through which this route is
accessible.
Metric:
Defines the priority of the route. The smaller the value is, the higher the
priority is. The default value is 0. It is recommended to keep the default
value.
Description:
Give a description for the entry.
Status:
Activate or inactivate the entry.
List of Rules
You can view the information of the entries and edit them by the Action buttons.
The first entry in Figure 3-47 indicates: If there are packets being sent to a device with IP address of
21
1.162.1.0 and subnet mask of 255.255.255.0, the Router will forward the packets from WAN1 port to
the next hop of 211.200.1.1.