![](https://pdfstore-manualsonline.prod.a.ki/pdfasset/4/af/4af3a5c6-ec03-40c4-bedf-8065a05b50fd/4af3a5c6-ec03-40c4-bedf-8065a05b50fd-bge.png)
14
Basic setup
Clock setting
The auto clock function will automatically set the built-in clock (Month, Day,
Year and Time) when the unit is connected to an antenna or cable system
and it is turned off. As the unit searches for a receivable station in your area
and it receives a broadcast signal for auto clock, the auto clock needs
several minutes to set itself.
Preparation:
• Connect the antenna or cable system.
• If you use a cable box, turn it on.
• Plug the AC power cord to the AC outlet.
Auto clock setting
Make sure the unit is turned off.
• If you press POWER, the Auto Clock
set is not effective.
1
Press DISPLAY to check the clock on the
screen.
3
If the clock is not set, check the antenna
condition. The auto clock may not function
properly if the reception condition is not
good.
4
Auto clock adjustment
To set auto clock to OFF
The auto clock adjustment will be performed at
12:00 PM everyday if you turn off the unit.
•
If you use a cable box and you want auto clock adjustment
to be performed, the cable box must be left on.
• The auto clock adjustment is not effective when there is a
difference of more than 5 minutes exists between the
built-in clock time and the actual time.
When shipped from factory the AUTO CLOCK is set to “ON”.
But if you do not want auto clock set (Adjustment):
Press MENU, then press B or A to select
option.
1
Press ▲ or ▼ to select “AUTO CLOCK”.
2
Press
B or A
to select “OFF”.
3
Press MENU repeatedly until the menu
screen is cleared.
• When the AUTO CLOCK is set to
“OFF”, the auto clock adjustment
does not function.
• Set the clock manually
16
.
4
Notes:
• If the unit does not operate properly, or No key operation
(by the unit and/or the remote control): Static electricity,
etc., may affect the player's operation. Disconnect the AC power
cord once, then connect it again.
•
If no buttons are pressed for more than 60 seconds, the menu
screen will return to normal TV operation automatically.
2
Wait at least three minutes and press POWER.
• Depending on the reception condition,
it may take approx. thirty minutes.
5S20101A [E]p13-17 12/16/04, 4:27 PM14