TELUS Mobility™
38 www.telusmobility.com
Range
AT+wv301=?
Parameter
Values:
The authentication Key parameter is a text string of
up to 32 characters. Unlike most text-string
parameters, the Authentication key is a text
representation of a hexadecimal number. Therefore,
only the characters 0-9 and A-F are acceptable. (The
lower case character, a-f is also acceptable).
NOTE: Although the parameter represents a
numeric value, the parameter is actually a text
string, so the parameter must be enclosed in
quotation marks.
Mobile IP Session Timer [AT+wv302]
The command determines the maximum amount of time that a remote node can be registered with its Home Agent before
having to renew its registration. This parameter sets a user preference for a value that is negotiated within the network.
During the negotiation process, the user preference may be overruled by the network without notification.
Command +WV302
Action
AT+wv302=<timer>
Query
AT+wv302?
Range
AT+wv302=?
Parameter
Values:
1800-65534 = Second before expiration
65535 = Timer never expires
7200 = Default value
DTE IP Address Prefix Length [AT+wv311]
The prefix-length is the number of contiguous bits in an IP address that makes up the network prefix (or network number
plus subnet number) of the IP address.
NOTE: This command sets the prefix length of the Mobile Node’s IP address, as specified by +WPNEI.
Command +WV311
Action
AT+wv311=
Query
AT+wv311?
Range
AT+wv311=?
Parameter
Values:
2-24 = Prefix length
2 = Default value
DTE Stack [AT+ws45]
This command sets the protocol for communication between the DEC and the DTE. Circuit-switched data connections allow
only the transparent character stream for packet data connections; use SLIP or CSLIP or PPP.
Command +WS45
Action
AT+ws45=
Query
AT+ws45?
Range
AT+ws45=?
