28 TASCAM RC-601MKII
SPECIFICATIONS
I/O
PHONES
Connector: Stereo phone jack
Max. output level:
50 mW + 50 mW (at 32
Ω
load)
PLAYER UNIT
Connector: D-Sub 15-pin
Electrical characteristics: RS-232C-compliant
MONITOR IN
Connector: D-Sub 25-pin
Max. input level: +6 dBV
Headphone output electrical characteristics
Playback frequency characteristics:
20 Hz to 20 kHz, +1.0/-2.0 dB
Signal-to-noise ratio: 70 dB or more (20 kHz LPF,
A-weighted)
Distortion (THD + N): 0.5 % or less (20 kHz LPF)
[1 kHz max. output level]
General
Power requirements: DC power supplied from
CD-601MKII
External dimensions: 216 W x 69 H x 201 D (mm)
(including feet and protrusions)
Weight: 1.3 kg (excluding cables)
Accessories:
Connector cable (5 m), Owner’s
Manual, Warranty
z Specifications and external appearance are subject
to change without notice in the interest of product
improvement.
z Note that illustrations in the Owner’s Manual may differ
on some products due to product improvements.
External Dimensions
216 mm
201 mm
69 mm
201 mm
List of Error Messages
If the following error messages are displayed during CD player use, try performing the
remedies described in the following table.
Indication Description Remedy
ERR01 TOC READ Error • The disc is scratched.
→ Replace the disc.
• The disc is dirty.
→ Clean the disc.
ERR02 GFS Error
ERR03 Focus Error
ERR04 SUBQ Error Replace the disc.
ERR05 TRAY LOADING Error Check the disc tray for foreign objects.
ERR06 SLED Error
Turn the power OFF then back ON again.ERR07 SYSTEM Error
ERR08 MEMORY Error
RC-601MKII_Eng.indd 28 3/24/2005 2:38:31 PM
