A SERVICE OF

logo

10
EN
Other operations
To Press
Stop recording STOP p
Pause recording PAUSE P
Release pause PAUSE P or PLAY (
Check the input source
in the stop mode REC twice
in the recording pause REC
mode Press the button until the
following display appears.
Check the sampling PLAY ( in the recording
frequency mode
The following display
appears while the button is
pressed.
Recording
5 Press the REC and PAUSE P
buttons.
The tape-corder enters the pause
mode. When the REC button only
is pressed, the tape-corder enters
the recording monitor mode (see
page 18) and does not begin
recording.
6 Press either the PLAY ( or
PAUSE P button.
The recording begins.
PAUSE
REC/ID WRITE
REC MUTE
PLAY
PAUSE
or
Tips
To begin recording
immediately, press the
PLAY ( button while
pressing the REC button
in the stop or playback
mode.
The input source is
displayed when the
source is changed
during recording,
monitoring, or in the
recording pause mode.
The sampling frequency
is displayed when the
sampling frequency is
changed during
recording.
Notes
Changing the sampling
frequency while
recording may cause
temporary sound
dropout to be recorded.
Connecting or
disconnecting the plug
from the PHONES/
LINE OUT jack while
recording may cause
noise to be recorded.
Noise may be recorded
when the display light is
turned on while
recording. In this case,
turn it off.