A SERVICE OF

logo

Basic Operations
55
US
Recording TV programs using the VCR Plus+
®
system
To stop recording
To stop the VCR while recording, press x STOP.
To use the DVD-VCR after setting the timer
To use the DVD-VCR before a timer recording begins, just press ?/1. The timer
indicator disappears from the display window and the DVD-VCR switches on.
Remember to press ?/1 to reset the VCR to the timer recording standby mode after
using the VCR.
You can also do the following tasks while the VCR is recording:
Reset the counter (page 45).
Display tape information on the TV screen (page 48).
Check the timer settings (page 56).
Watch another TV program (page 49).
Tip
To check, change or cancel the program setting, see “Checking/changing/canceling timer
settings” on page 56.
Notes
If the VCR does not accept the PlusCode number, this means that:
The PlusCode number is incorrect.
“Once,” “Daily,” “Mo~Sa,” “Mo~Fr” or “Weekly” was selected incorrectly. You cannot
select “Daily,” “Mo~Sa,” “Mo~Fr” or “Weekly” for a program that airs more than seven
days ahead.
Correctly set the PlusCode number again from step 3.
When the PlusCode number is incorrect, “Invalid code” will appear in the display.