A SERVICE OF

logo

33
Basic Setup Wizard
Gigaset SE366 WLAN / englisch / A31008-M1063-R101-4x-7619 / configure_router.fm / 13.11.2008
Schablone 2004_12_27
ì Select how Internet sessions are to be established via the Connection mode:
–Select Always on if the connection is to remain set up when the Gigaset SE366
WLAN is switched on.
–Select Connect on demand if applications such as a Web browser or an e-mail
program are allowed to connect to the Internet automatically.
–In the Idle time before disconnect field, enter a period of time after which the
Internet connection is to close down automatically if no data is transmitted
(default setting: 3 minutes, range: 1 to 99 minutes).
This time setting only applies to the Connect on request option. A permanent
connection is achieved using the Always on option.
–Select Connect manually if you always want to establish and end the connection
to the Internet manually. If you subscribe to a time-based service this will save
you high connection charges. How to establish a connection manually is
described on page 82.
ì Click Test Settings to check the Internet connection. The device will attempt to con-
nect to the Internet. Any existing Internet connection will be closed first.
You will find information about the test steps and results on the Internet Connec-
tion Test screen.
PPPoE pass-through
PPPoE pass-through enables you to use an additional Internet connection (with another
service provider) from one PC. You can find detailed information about this on page 47.
ì Activate PPPoE pass-through if you wish to use this function.
Using UPnP (Universal Plug & Play)
PCs with UPnP (Universal Plug & Play) can offer their own network services and automat-
ically use services offered on the network. You can find detailed information about this
on page 48.
ì Activate UPnP if you wish to use this function.
ì Click Next >.
Note:
Connection to the Internet is only possible if you have entered all the data of your
Internet provider correctly.
Note:
If you subscribe to a time-based service, this option can result in high connec-
tion charges.