Display] is set to [Setting Effect OFF], the brightness of the shot image will not be the
same as that of the displayed Live View.
Hint
When you use a third-party flash, such as a studio flash, Live View Display may be dark
for some shutter speed settings. When [Live View Display] is set to [Setting Effect OFF],
Live View Display will be displayed brightly, so that you can easily check the composition.
[129] How to Use
Using shooting functions Setting the other functions of this product
Release w/o Lens
Sets whether or not the shutter can be released when no lens is attached.
1. MENU → (Custom Settings) → [Release w/o Lens] → desired setting.
Menu item details
Enable:
Releases the shutter when no lens is attached. Select [Enable] when attaching the product
to an astronomical telescope, etc.
Disable (default setting):
Does not release the shutter when a lens is not attached.
Note
Correct metering cannot be achieved when you use lenses that do not provide a lens
contact, such as the lens of an astronomical telescope. In such cases, adjust the
exposure manually by checking it on the recorded image.
[130] How to Use
Using shooting functions Setting the other functions of this product
S. Auto Img. Extract.
Sets whether or not to save all the images that were shot continuously in [Superior Auto].
1. MENU → (Custom Settings) → [S. Auto Img. Extract.] → desired setting.
Menu item details
