![](https://pdfstore-manualsonline.prod.a.ki/pdfasset/f/a1/fa1fe39f-48b5-4e91-891b-43eaaeba9d85/fa1fe39f-48b5-4e91-891b-43eaaeba9d85-bg47.png)
HVL-F43AM
4-278-307-11(1) GB
C:\édéñÉtÉHÉãÉ_\ÅiäîÅjÉGÉXÉPÉCÉèÅ[Éh\SO-
NY\VX9197\SourceÉfÅ[É^\4278307111\4278307111\4278307111HVLF58AMUC\01GB-
HVLF58AMUC\070C04.fm
Master: Right
Additional Information
71
• Remove the batteries only after turning the power off and waiting several
minutes, when changing the batteries. The batteries may be hot, depending on
the battery type. Remove them carefully.
• Remove and store the batteries when you do not intend to use the camera for a
long time.
Temperature
• The flash unit may be used over a temperature range of 0 °C to 40 °C.
• Do not expose the flash unit to extremely high temperatures (e.g. in direct
sunlight inside a vehicle) or high humidity.
• To prevent condensation forming on the flash, place it in a sealed plastic bag
when bringing it from a cold environment into a warm environment. Allow it to
reach room temperature before removing it from the bag.
• Battery capacity decreases at colder temperatures. Keep your camera and spare
batteries in a warm inside pocket when shooting in cold weather. The
low-battery indicator may blink even when there is some power left in the
batteries in cold weather. Batteries will regain some of their capacity when
warmed to normal operating temperature.