Smithco 44-508 Manual

next previous

REF.# PART# DESCRIPTION QTY.

1 40-127 Tank, 12-gal. SS (Black Lip) 1

3 40-314 D-Handle 1

4 40-316 Spring 1

6 40-317 Rod Only 1

7 40-306 Spring 1

8 40-319 Nut 1

9 40-302 Clamp 1

10 40-321 Cover 1

40-321-1 Cover 1

11 40-323 Gasket 1

40-323-1 Gasket 1

12 40-324 Ring 1

13 40-308 Nut 2

14 40-309 Backing Washer 1

15 40-310 Plunger Cup 1

16 40-311 Disc Spreader 1

17 40-312 Lock Washer 1

18 40-303 Pump Barrel 1

19 40-302 Gasket 1

20 40-304 Rubber Valve 1

21 40-313 Compression Fitting w/O-Ring 2

PLEASE NOTE:

TO REMOVE PUMP FROM 3-PRONG CLAMP HEAD STYLE: Turn handle

counterclockwise until 3-prong clamp is loose. Then rotate clamp counterclockwise to

stop. Lift pump out.

TO CLOSE AFTER FILLING: Place pump prongs down into slots in funnel. Turn clamp

clockwise to further position under bottom slot. Then turn handle clockwise until tightly

locked and sealed in place.

CLOSING PUMP AFTER FILLING: Be sure not to over-tighten pump as it will be difficult

to remove and can damage seal gasket. Periodically lubricate seal with a white lithium

grease to prevent it from drying out and cracking.

4085 SPRAY GUN