Sharp XE-A217W/XE-A217B Manual

A SERVICE OF

next previous

124

ReplacingthePaperRoll



■

Recordingpaperspecications

Be sure to use paper rolls specied by SHARP.

The use of any other paper rolls than specied could cause paper jamming, resulting in register malfunction.

Paperspecication

Paper width: 57.5 ± 0.5 mm

Max. outside diameter: 80 mm

Quality: High quality(0.06 to 0.08 mm thickness)

•Besuretosetapaperrollpriortousingyourmachine,otherwiseitmaycauseamalfunction.

Install the paper roll in the printer. Be careful then to set the roll and cut the paper end correctly.

To the printer

Incorrect

To the printer

Correct

Correct Incorrect

(How to set the paper roll) (How to cut the paper end)



■

InstallingthePaperRoll

Always install the paper roll even when you set the register for not printing receipt in REG mode.

1.

Remove the printer cover.

2.

Lift up the print roller arm.

3.

Set the paper correctly in the paper roll cradle.

NOTE

Before placing a new paper roll in the paper

roll cradle, cut off the pasted (taped) part of the

paper and conrm that the cut end of the paper is

straight.

Print roller arm