10
• The LED ´ flashes red.
• Three beeps are heard in the headset every 30 seconds (3x).
• Less than five minutes of talk time are left.
Switching the headset on/off
f
Open the microphone boom ³.
The headset is switched on. The
LED ´ indicates the current operat-
ing mode:
• If the LED ´ flashes slowly in
blue, the headset is already
paired to a mobile phone. The
headset is therefore ready to use.
• If the LED ´ flashes alternatingly
in red and blue, the headset is not yet paired to a mobile
phone. Pair it as described under “Pairing the headset to mo-
bile phones or other Bluetooth devices” on page 11.
• If the headset is already paired to a mobile phone and if there
is an incoming call on your mobile phone, the call is answered
immediately by opening the microphone boom ³ without any
further action.
To switch off the headset:
f Close the microphone boom ³.
The headset is switched off. The LED ´
stops flashing.
All settings are saved. The battery lasts
longer, if you switch off the headset
when not telephoning with it.
³
³
VMX 100_PRT.pdf 14 03.05.2007 15:02:12
