Adjustment tips and functions
31
Adjustment tips and functions
The operating menu allows you to make settings for your receiver and your
transmitters. The “Guitar Tuner” and “Soundcheck” standard displays
provide additional functions and can be call up by turning the jog dial,
without having to get into the operating menu.
Standard displays with additional functions
Tuning a guitar (SK transmitters only)
̈ Activate the “Guitar Tuner” standard display via the operating menu
(see page 40).
̈ Connect a guitar to your SK transmitter.
̈ On the receiver, change to the “Guitar Tuner” standard display (see
page 25).
̈ Tune your guitar.
The receiver automatically recognizes the pitch of the plucked string.
For more information on the “Guitar Tuner” menu item, refer to
page 40.
Doing a soundcheck
By doing a soundcheck, you can check the reception area for field strength
gaps (“dropouts”) which cannot be compensated for by the receiver’s
diversity circuitry.
̈ If necessary, change from the “Soundcheck” standard display to one of
the other standard displays of your receiver.
The “Soundcheck” standard display must not be activated until
later because otherwise the recording will give wrong results.
30
25
20
-40
“Guitar Tuner”
standard display
“Receiver Parameters”
standard display
440 Hz
542.625 MHz
+ 12dB
P
542.625
ew500 G3
ew500 G3
B.CH: 20.30
EQ
+ 12dB
MHz
SKM500
P
PEAK
-10
040
30
20
10
-20
-40
AF
RF
-30
PEAK
-10
040
30
20
10
-20
-40
AF
RF
-30
