145
Synchronizing with MIDI devices
Section 5
fig.05-410d
3. Press CURSOR [ ] [ ] to select “MMC Master,” and
turn the TIME/VALUE dial to set the MMC mode.
fig.05-411d
OFF: MMC will not be transmitted.
MASTER:
MMC information is sent. The BR-864 becomes
the master of the external MIDI instrument.
* For details on the MMC functionality supported by the BR-
864, read “MIDI Implementation” (p. 185).
4. Press CURSOR [ ] [ ] to select “Sync Gen,” and
turn the TIME/VALUE dial to set “MTC.”
5. Make settings on your sequencer software.
Make the following settings on your sequencer software.
For details on making these settings, refer to the manual
for your sequencer software.
MTC: receive
MTC type:
same setting as the MTC Type selected on the
BR-864
MMC: receive
6. Press [UTILITY] (or press [EXIT] repeatedly) to return
to the Play screen.
* During updating, “Keep power on!” appears in the upper line
of the display, while the lower line shows what is being
processed.
