Tool service must be performed only by qualified
Service or maintenance performed by
unqualified personnel may result in a risk of injury.
When servicing a tool, use only identical replacement
parts. Follow instructions in the Maintenance section
Use of unauthorized parts or failure to
follow Maintenance Instructions may create a risk of
Hold tool by insulated gripping surfaces when
performing an operation where the screw may
Contact with a “live” wire will
also make exposed metal parts of the tool “live” and
Know your power tool. Read operator’s manual care-
fully. Learn its applications and limitations, as well
as the specific potential hazards related to this tool.
Following this rule will reduce the risk of electric shock,
Always wear safety glasses with side shields.
Everyday glasses have only impact resistant lenses. They
are NOT safety glasses. Following this rule will reduce
Protect your lungs. Wear a face or dust mask if the
Following this rule will reduce the
risk of serious personal injury.
Protect your hearing. Wear hearing protection during
extended periods of operation.
reduce the risk of serious personal injury.
Battery tools do not have to be plugged into an
electrical outlet; therefore, they are always in
operating condition. Be aware of possible hazards
when not using your battery tool or when changing
Following this rule will reduce the risk of
electric shock, fire, or serious personal injury.
Do not place battery tools or their batteries near
This will reduce the risk of explosion and
Never use a battery that has been dropped or
A damaged battery is subject to
explosion. Properly dispose of a dropped or damaged
Batteries vent hydrogen gas and can explode in the
presence of a source of ignition, such as a pilot light.
To reduce the risk of serious personal injury, never use
any cordless product in the presence of open flame. An
exploded battery can propel debris and chemicals. If
exposed, flush with water immediately.
Do not charge battery tool in a damp or wet
Following this rule will reduce the risk of electric
For best results, your battery tool should be charged
in a location where the temperature is more than
50°F but less than 100°F. Do not store outside or in
Under extreme usage or temperature conditions,
battery leakage may occur. If liquid comes in contact
with your skin, wash immediately with soap and water,
then neutralize with lemon juice or vinegar. If liquid
gets into your eyes, flush them with clean water for
at least 10 minutes, then seek immediate medical
Following this rule will reduce the risk of seri-
Do not use the impact driver as a drill.
is not designed to be used as a drill.
Do not drive a screw where there may be hidden
wiring behind the surface.
Contact with a “live” wire will
make exposed metal parts of the tool “live” and shock
Refer to them frequently and
use them to instruct others who may use this tool. If you
loan someone this tool, loan them these instructions
