Setting Up the Scanner
32
2
-
--
-Before turning off the power
Before you turn off the power of this
machine, make sure that a standby
screen is displayed on the display
panel.
If you turn off the power while the
Scanner Features menu is displayed,
all the settings that you have config-
ured could be discarded, and this ma-
chine could return to its factory
default status.
You should also confirm that B is not
displayed on the screen, or the B in-
dicator on the front of this machine is
not lit, when you turn off the power.
Otherwise, loss of scan data or failure
in sending files might occur.
