A SERVICE OF

logo

9
Connecting the System
ENG/MASTER 96
<CRD4067A/U> 10
Connecting the power cord (1)
Fuse (10 A)
Yellow
To terminal always supplied
with power regardless of
ignition switch position.
Red
To electric terminal controlled
by ignition switch (12 V DC)
ON/OFF.
Black (ground)
To vehicle (metal) body.
Orange/white
To lighting switch terminal.
Fuse resistor
Fuse resistor
With a 2 speaker system, do not connect
anything to the speaker leads that are not
connected to speakers.
White
White/black
Gray
Gray/black
Green
Green/black
Violet
Violet/black
Front speaker Front speaker
Left Right
+
+
+
+
Note:
When a subwoofer is connected to this product instead
of a rear speaker, change the rear output setting in
the Initial Setting. (Refer to the Operation Manual.)
The subwoofer output of this product is monaural.
Rear speaker
or Subwoofer
Rear speaker
or Subwoofer
CRD4067A_U_inst_001_027_US 10/24/05 19:49 Page 10