64
En
Example 7) Inputting a command to jump to another
group.
To change a previously input “GO TO GROUP” command
group number, press
RECALL
during Detailed or List display, and
input the new number.
Using this command enables consecutive jumping to different
groups.
< Conceptual representation >
You can also create standby display groups. If you do this,
you return to the standby display after jumping to another
group.
< Conceptual representation >
DVD.
Setting the Subtitle, Audio
and Angle
SUBTITLE
÷
“00” turns the screen color to the color specified in “Back-
ground color” in the GUI menu and makes the played image
invisible.
÷
“01” to “32” displays the corresponding subtitle.
÷
“33” plays with Subtitle OFF.
÷
“34” is used to make the played image made invisible with
“00” visible again.
÷
“99” retains the previous condition. This is used to change
other setting than SUBTITLE while maintaining the SUBTI-
TLE setting the same.
÷
“35” to “98” are invalid.
AUDIO
÷
“0” plays image with Audio OFF.
÷
“1” to “8” selects and plays the corresponding audio.
÷
“9” retains the previous condition.
ANGLE
÷
“1” to “8” selects and plays the corresponding angle.
÷
“9” retains the previous condition.
÷
“0” selects and plays Angle 9.
NOTE
÷
When “retain the previous condition” is selected, “
✽
” is dis-
played in the input screen.
÷
The barcode/command stack cannot be executed if a value
that does not exist in the disc is input.
DVD.
To use only the chapter
search or frame search
In item “MARK CHAPTER” or “MARK FRAME”, simply press
NEXT
without setting anything.
A still image is displayed after search.
DVD.
To change a value
during input
Press the numeric button of the correct number (including 0).
To return to a previous setting point, press
PREV
.
DVD.
To cancel input in the middle
Move the ‰ (pointer) to “EXIT” by pressing the cursor button
(right direction) and press
ENTER
.
1. When the TITLE number
is flashing, press
RECALL
.
2. The display changes to
that indicated in the fig-
ure on the left. Input the
number of the group you
want to jump to, and
press
NEXT
.
GO TO GROUP - 002
*
*
*
*
GROUP - 001
GO TO GROUP - 004
*
*
*
*
GROUP - 002
GO TO GROUP - 010
*
*
*
*
GROUP - 004
REPEAT
*
*
*
*
GROUP - 001
GO TO GROUP - 001
GROUP - 002
*
*
*
*
GO TO GROUP - 001
*
*
*
*
GROUP - 004
GO TO GROUP - 001
*
*
*
*
GROUP - 003
example
RECALL 002 + PLAY
or
External option switch
Group 002
example
RECALL 003 + PLAY
or
External option switch
Group 003
example
RECALL 004 + PLAY
or
External option switch
Group 004
Jump
Barcode/Command stack setting
BC/COMMAND STACK GROUP 004: 003
GO TO GROUP - 000
