23
MP3 Play
Display and indicators
FORM 1
FORM 2
qSource name
wMP3 indicator
eBit rate indicator
rTrack number
tFolder name
yPlay time
uFile name
Basic operation
The built-in CD player can playback MP3 files
recorded on CD-ROM discs. (See page 71.)
1. Press OPEN to open the front panel.
2. Insert a CD-ROM into the CD loading slot.
3. Close the front panel.
4. Press VOLUME to extend the VOLUME
outward.
• When you press VOLUME, it extends out-
ward so that it becomes easier to trun. To
retract VOLUME, press it again.
5. Turn VOLUME to adjust the volume.
6. Press 5 or ∞ to select a folder.
• You can not select a folder in which no
MP3 file is recorded.
7. Press
22
or
33
to select a track.
Pressing 3 skips to the start of the next
track.
Pressing 2 once skips to the start of the cur-
rent track. Pressing again will skip to the
previous track.
• If you press and hold 2 or 3, you can per-
form fast forward or reverse.
8. Press OPEN and then press CD EJECT to
eject the CD-ROM.
• Be sure to close the front panel after
removing the CD-ROM.
WARNING:
• Do not use with the front panel left open. If the
front panel is left open, it may result in injury
in the event of an accident.
Note:
• You can select MP3 as the source by pressing
SOURCE when a CD-ROM is loaded in this product.
• When the front panel is open, multi-function but-
tons are not available.
• Do not insert anything other than a CD into the CD
loading slot.
• A CD left partially inserted after ejection may incur
damage or fall out.
• If a CD-ROM cannot be inserted fully or playback
fails, make sure the recorded side is down. Press
the CD EJECT and check the disc for damage before
reinserting it.
• If the built-in CD player cannot operate properly, an
error message (such as “ERROR-12”) appears on
the display. Refer to “Understanding built-in CD
player error messages” on page 74.
CD EJECT button
CD loading slot
tu
qrwy
ty
qwer
