Subwoofer output
Antenna jack
This product
Front output
Fuse
(10 A)
IP-BUS cable
Multi-CD player
(sold separately)
P
r
m
sol
separatel
System remote control
Front speaker Front s
eake
Left Right
Perform these connections when using the
optional amplifier.
+
≠
+
≠
+
≠
+
≠
+
≠
+
≠
+
≠
+
≠
Front speaker Front s
eake
With a 2 speaker system, do not connect
anything to the speaker leads that are not
connected to speakers.
Rear speaker
Gray
Gray/black
Violet
Violet/black
White
White/black
Green
Green/black
Rear s
eake
Power am
(sold se
aratel
P
r
m
sol
separatel
Subwoofer Subwoofer
+
≠
+
≠
Rear output
Rear speaker Rear s
eake
IP-BUS input
(Blue)
Wired remote input
Hard-wired remote control adaptor can be
connected (sold separately).
Blue/white
Connect to system control terminal of the
power amp or auto-antenna relay control
terminal (max. 300 mA 12 V DC).
Yellow
Connect to the constant 12 V supply terminal.
Red
Connect to terminal controlled by ignition switch (12 V DC).
Black (chassis ground)
Connect to a clean, paint-free metal location.
Connect with RCA cables
(sold separately)
Connecting the Units ENGLISH
Subwoofer output
Antenna jack
This product
Front output
Fuse
(10 A)
Rear output
IP-BUS cable
M
ulti-CD
player
(sold separately)
Left Right
+
≠
+
≠
+
≠
+
≠
Front speaker Front speaker
Subwoofer
(4 Ω)
Subwoofer
(4 Ω)
Gray
Gray/black
Violet
Violet/black
White
White/black
Green
Green/black
IP-BUS input
(Blue)
Note:
Change the initial setting of this unit (refer to the Operation
Manual). The subwoofer output of this unit is monaural.
+
≠
Violet
Violet/black
Green
Green/black
Not used.
Subwoofer (2 Ω)
When using a subwoofer of 70 W (2 Ω), be sure to connect with Violet and Violet/black leads of this unit.
Do not connect anything with Green and Green/black leads.
Blue/white
Connect to system control terminal of the
power amp or auto-antenna relay control
terminal (max. 300 mA 12 V DC).
Yellow
Connect to the constant 12 V supply terminal.
Red
Connect to terminal controlled by ignition switch (12 V DC).
Black (chassis ground)
Connect to a clean, paint-free metal location.
Wired remote input
Hard-wired remote control adaptor can be
connected (sold separately).
7 When not connecting a rear speaker lead to a Subwoofer
7 When using a Subwoofer without using the optional amplifier
7 When not connecting a rear speaker lead to a Subwoofer
