En
8
Front panel
1 PHONES jacks
Connect headphones here.
Both stereo phone plugs (Ø 6.3 mm) and stereo mini phone plugs (Ø 3.5 mm)
can be used.
! There are two input jacks, both a stereo phones jack and a mini phones jack,
but do not use both simultaneously. If both are used simultaneously, when
one is disconnected and/or connected, the volume of the other may increase
or decrease suddenly.
2 HEADPHONES LEVEL control
Adjusts the audio level output from the [PHONES] terminal.
3 INPUT SELECT switch
Selects the input source of each channel from the components connected to
this unit.
— [PC]: Select this to use the track loaded in the Serato DJ software’s deck.
— [MIC1] or [MIC2]: Select one of these to use the microphone connected to
the [MIC1] or [MIC2] terminal.
— [CD]: Select this to use a line level output device (DJ player, etc.) connected
to the [CD] terminals.
4 INPUT SELECT switch
Selects the input source of each channel from the components connected to
this unit.
— [PC]: Select this to use the track loaded in the Serato DJ software’s deck.
— [PHONO]: Selected when using an phono level (for MM cartridge) output
device such as an analog turntable connected to the [PHONO/LINE] input
terminal.
— The sound is muted for approximately 3 seconds when switched to
[PHONO].
— [LINE]: Select this to use a line level output device (DJ player, etc.) connected
to the [PHONO/LINE] input terminals.
5 CROSS FADER CURVE selector switch
This switches the crossfader curve characteristics.
! The further the control is turned clockwise, the sharper the curve rises.
! The further the control is turned counterclockwise, the more gradually the
curve rises.
Connecting the input/output terminals
Connecting input terminals
Rear panel
AUDIO OUT
RL
CON
Analog player Analog player
DJ player
Computer
Portable audio
device
Portable audio
device
Microphone Microphone
DJ player DJ player
AC adapter
(included)
To power outlet
R
L
R
L
R
L
R
L
