pg.02
ZX
Ti
amp manual
• TCCH
tm
Thermal Convection Cooled Heatsink. This proprietary design uses a variable speed
fan to ensure that the ZX
Ti
keeps its cool when the music gets hot!
• High-current Triple Darlington output stage. This tried and true topology is the standard for
outstanding dynamic peak output performance
• TAIM
tm
Timed Acoustically Integrated Muting. Ensures dead silent turn on & off. No clicks, pops
or buzzes
• Tri-linear
tm
capability allows simultaneous stereo and bridged operation
• Output current sensing allows the ZX
Ti
to automatically optimize the power supply and output
stage to reliably operate at impedances as low as 2 ohms bridged or 1 ohm stereo
• Intuitive crossover configuration switch assures easy initial setup
• 24dB per octave, high pass or low pass crossover. Continuously variable from 40 Hz to 8 kHz front
and 40 Hz to 800 Hz rear
• Auxiliary outputs route high pass, low pass or full range signals to another amplifier
• Twin-T
tm
Bass Boost circuit provides up to 18dB of boost at 45 Hz
• Superbrite
tm
Tri-LED power-on indicator
• Independent Thermal and Overload protection LED indicators
• Custom formed chassis with unique Titanium finish
• 24kt gold plated power and speaker terminals
• 2-ounce copper, double-sided G10 glass-epoxy printed circuit boards
• Replaceable insulated mounting feet
• Audiophile grade capacitors and 1% tolerance metal film resistors throughout the audio path
• Optional LPL44
tm
Low Pass Level controller allows the driver to adjust bass volume from the
driver’s seat
• Optional RDDP
tm
Remote Diagnostic Display Panel uses two tri-color LED’s allowing the driver to
monitor the amplifier’s battery voltage, power-on, thermal and overload status
• Optional SDT
tm
Superior Digital Technology allows the driver to monitor the amplifier’s battery
voltage with a vacuum florescent display along with a tri-color LED indicating power-on, thermal
and overload status
