© 2011 Phoenix Gold • www.phoenixgold.com
Subwoofer Owner’s Manual
system diagrams
+
-
All voice coils are wired in parallel for 1 ohm load.
SD600.1 makes maximum power into 1 ohm load.
Dual 2 ohm Subwoofer
Ti212d2 MONOBLOCK
SINGLE SUBWOOFER SYSTEM
SD600.1 + Ti212d2
Toutes les bobines mobiles sont câblées en parallèle de 1
Ohms. SD600.1 faire puissance maximale en 1 Ohms.
Specifications
T/S Parameters: Ti210d2 Ti212d2
Re (Dcr) .99 .9
FS (Hz) 37.2 30.5
Sd (SqM)
.037
.053
BL TM 8.1 8.8
Qms 5.42 5.44
Qes .82 .61
Qts .71 .55
Vas (liters) 12.7 39.6
Cms (uM/N) 71 100
Mms (gms) 206.81 271.91
SPL
91dB
91dB
Impedance Dual 2 Dual 2
Specifications: Ti210d2 Ti212d2
RMS Power Handling 600 watts 600 watts
PEAK Power Handling 1200 watts 1200 watts
Xmax (Peak to Peak) 40mm 40mm
Mounting Diameter 8 7/8in - 226mm 10 7/8in - 276mm
Mounting Depth 6in -150mm 6 1/2in - 164mm
*Specifications subject to change
+
+ +
-
- -
Dual 2 ohm Subwoofer (wired in series)
Ti800.4 makes maximum power into a 4 ohm bridged
load. Subwoofer is dual 2 ohm and wired in series for a
final load of 4 ohm.
Ti212d2 FOUR CHANNEL
SINGLE SUBWOOFER SYSTEM
Ti800.4 + Ti65CX 4 ohm stereo front
and Ti212d2 4 ohm bridged rear
Ti800.4 faire puissance maximale en 4 ohm charge
comblé.
+
-
Note: Ti600.4 can be substituted for Ti800.4 in this
system. Wiring is the same.
+
-
