
1998 Sep 23 2
Philips Semiconductors Product specification
4 × 25 W BTL quad car radio power
amplifier
TDA8567Q
FEATURES
• Requires very few external components
• High output power
• Low output offset voltage
• Fixed gain
• Diagnostic facility (distortion, short-circuit and
temperature pre-warning)
• Good ripple rejection
• Mode select switch (operating, mute and standby)
• Load dump protection
• Short-circuit safe to ground and to V
P
and across the
load
• Low power dissipation in any short-circuit condition
• Thermally protected
• Reverse polarity safe
• Electrostatic discharge protection
• No switch-on/switch-off plop
• Flexible leads
• Low thermal resistance
• Pin compatible with the TDA8568Q, except for the gain.
GENERAL DESCRIPTION
The TDA8567Q is an integrated class-B output amplifier in
a 23-lead Single-In-Line (SIL) plastic power package.
It contains four amplifiers in BTL configuration, each with a
gain of 26 dB. The output power is 4 × 25 W in a 4 Ω load.
APPLICATIONS
• The device is primarily developed for car radio
applications.
QUICK REFERENCE DATA
ORDERING INFORMATION
SYMBOL PARAMETER CONDITIONS MIN. TYP. MAX. UNIT
V
P
operating supply voltage 6 14.4 18 V
I
ORM
repetitive peak output current −−7.5 A
I
q(tot)
total quiescent current − 230 − mA
I
stb
standby current − 0.2 100 µA
I
sw
switch-on current −−80 µA
Z
i
input impedance 25 30 − kΩ
P
o
output power THD = 10% − 25 − W
SVRR supply voltage ripple rejection R
s
=0Ω−60 − dB
α
cs
channel separation R
s
=10kΩ−50 − dB
G
v
closed loop voltage gain 25 26 27 dB
V
n(o)
noise output voltage R
s
=0Ω−−120 µV
∆V
O
DC output offset voltage −−150 mV
TYPE
NUMBER
PACKAGE
NAME DESCRIPTION VERSION
TDA8567Q DBS23P plastic DIL-bent-SIL power package; 23 leads (straight lead length 3.2 mm) SOT411-1