C
Lubricate the Trimmer teeth with Norelco
Razor Lubricant (model AL80) or with one
drop of mineral oil.
Close Trimmer by sliding Trimmer switch
down.
This r
azor has no other user-serviceable parts.
Any other service should be perfor
med by an
Authorized Norelco Service Location.
Assistance
For assistance or the Authorized Norelco Service
Location nearest you,call toll free:
1-800-243-3050
or visit our website:www.norelco.com
Authorized Norelco Service Location information
is available 24 hours a day,7 days a week.
5
4
11
ENGLISH
Repeat the process for the other two sets
of cutters and combs.
Replace the frame.
C
Press down and turn wheel clockwise until
it locks into place.
Replace the Razor Head Assembly back on
razor.
◗ If the razor heads have been properly inserted,
a shiny circle is visible in the middle of the razor
head assembly.
Once A Month:Razor Heads
◗ For optimum performance,razor cutters and
combs should be cleaned in a degreasing liquid
(e.g.Norelco Razor Cleaner,Model RC1776,or
alcohol) and lubricated with Norelco Razor
Lubricant,model AL80,or one drop of mineral
oil (in the center of the head).
Every Six Months:Trimmer
Turn razor OFF.
Push Trimmer Slide Switch up to pop up
Trimmer.
C
Clean Trimmer with the brush.
3
2
1
10
9
8
7
10
ENGLISH
